How To Build An Adirondack Chair

Last Updated on

A life spent completely outdoors will never be complete if you fail to spice it with getting fresh air outside most especially during the heat of the summer. You need a comfortable seat arrangement to savor the beauty outside. We shall be discussing how you can save costs by producing a sturdy model of the popular Adirondack chair. There is a sense of great satisfaction when you see the final output of your craft. The process of how to build an Adirondack chair is easy; all you need for this DIY process will be delivered to you below. Now let’s get straight to business.

The Building Plans

The first plan of actions is to get the plan that will suit your dream of the chair. Here, you have to spend quality time in research in other to get a plan that will make you glad because the plan of your choice will represent the true picture in the practical reality of your DIY efforts. There are some sites that provide excellent Adirondack Chair Plans free of charge. Just take your time and lay a solid foundation by choosing a plan whose design you will easily download and print to produce a model that will always wow you.

The gathering Of Supplies

When you have settled for a particular plan and you have the hard copy of it before you, the next step is to look at the supplies that you will need to put the concept to practical reality. No stone should be left unturned here. Ensure that you have gotten all that you will be needing to effect the actualization of your dream Adirondack chair. If you are going to make one piece, the following materials will be needed:

10 ft treated lumber- Needed for the back support of the chairadirondack chair plans

8 ft treated lumber- Needed for cuts that will aid the support of the chair

12 ft 1 X 6 treated lumber

60 -1 1/2″ deck screws

10 – 2″ X 1/4″ carriage bolts accompanied by flat nuts and washers

1st board- For cuts needed for middle back, upper back support, two arms, and one seat

2nd board- For cuts needed for two the legs

The above materials are what you will need for a single chair. If you want to make more than one, then you are required to multiply the provisions above by the number that you required. If for instance, you are targeting four pieces of furniture, then multiply all that is given above by four.

How To Build An Adirondack Chair

Having gotten the materials that you will need, you can now proceed into action without any form of hinderances on your way. Ensure that the print out of the plans is in appropriate sizes. Cut out your template pieces with your pair of scissors and spray the wood with an adhesive spray. The adhesive will hold your Adirondack template firmly on the wood when you carefully place it on. You have to be clinical in your actions here because any error will lead to a measurement that will not fit in properly.

how to build an adirondack chair

Cutting Out The Shape Of The Template

Now that the shape that you needed has been clearly marked out on the wood, you can now proceed to cut them into the right shape that you have marked out. You will now need a quality jigsaw to cut out the template. Go for the cordless models so that you will have freedom cutting the pieces with the disturbance that cords bring to bear while performing the operations. For a smooth operation, get at least two saws so in the event that a battery runs down, you can easily switch to another.

In the event that you need more than one cut out, you can use the first cut out to trace the remaining ones by using your pencil to mark out the shape on the wood in place of the paper template.

Sanding The Chair Woods

Definitely, you desired a smooth finish. When you are done with cutting all the pieces, take time off to sand each of them to a degree of smoothness that you will be proud of. It is best to do it at this stage for a perfectly smooth finish, do not do it after the assembly of the component parts.

The Lay Out Of The Pieces

You have to make assurances doubly sure, in other to achieve this, make sure you lay the patterns you have cut out before you on the floor to see if the dimensions will actually fit into each other in a seamless form. When you are sure that you have the right dimensions in place, then you can remove the paper template from the cut pieces because you are now set to couple the pieces into one that will give you expected results.

The Assembling Of The Adirondack Chair

You are advised to start from the leg upwards. Starting from the base will make the process of coupling the wood easy. When the legs have been put in the perfect shape, you can then move on to add the other upper parts- the arms and the back. When that is done, you can now add all the boards and your Adirondack chair will come up with the shape of the concept you saw in the plan.

Now you have to sand the chair again to smoothen out all the rough edges that escaped your attention when you did it in the first instance. All the remaining rough edges should be smoothened at this point in time. If you are the fashion icon that desired a great curb appeal through any of your favorite colors; then you can go on and spray the Adirondack chair in your choice color.

At this juncture, you will have your masterpiece of a model before you. The satisfaction of having done everything from the scratch will definitely overwhelm you if that is your first attempt. You will get a sturdy model of a chair at an incredibly reduced price. The end here definitely justifies the means.

Rate this post

Speak Your Mind

*

0 Shares
Share
Tweet
Pin
Share