Top 8 Best Air Tool Oil of 2023 – Reviews And Buying Guide

If you make use of an air tool, perhaps the biggest concern in the life expectancy and operation of your professional-grade pneumatic, or air, tools is moisture. Luckily, with the help of the best air tool oil, you can avoid this problem.

As we now that water vapor is always present in the air around us at varying temperatures. When this air is compressed, the wetness in the inlet air gets more intense with every cubic foot. As the air gets compressed, it also gets very hot; since the air is hot, the collected water in it remains as vapor. But, when compressed air is expanded via air tools, it cools down rapidly.

With high moisture content in the compressed air, this fast cooling action causes freeze-ups at important exhaust points of pneumatic tools. Even before the hot air reaches the air tool, it starts cooling down just after it leaves the compressor and then starts condensing the moisture into water.

Because of the reason mentioned above, this leads to failure and deterioration in contractors and industrial-grade air tools and other related equipment. It is also crucial to note that running air tools with hotter inlet temperatures air to circumvent the liquid moisture from building up is also damaging to air tool operations.

What Is Air Tool Oil?

To avoid problems like the above, it is recommended that you use air tool oil, or also known as pneumatic lubricator oil. These are an aerosolized stream of oil that is injected into the tool’s airline to provide lubrication to the internal working parts of pneumatic tools and also other devices like motors, valves, and actuating cylinders.

Pneumatic oil typically has low viscosity and is easily atomized; hence they can be transported with ease by the compressed air in the pneumatic system. Some systems might also have an oil reservoir that automatically dispenses lubricating pneumatic oil, while other appliances might require manual addition of a few drops every now and then.

Mostly, mineral oil is used to make pneumatic oil. These oils are recommended for lubrication of pneumatic equipment like pavement breakers, tempers, wagon drills, chippers, drifters, stoppers, jackhammers, and rock drills. They can also be used in small in-plant air tools like hoists, riveters, impact wrenches, tapers, drills, filling tools, grinders, etc.

Top 8 Best Air Tool Oil Reviews

For a life free of any worries, you need to have some tools that you can use immediately in need. Hence, it is important that you do everything in your power to elongate their lifespans. To increase the tool’s durability, you need to take care of them daily.

There are, however, several ways to take care of your air tools. But not every way might be the easiest or the most effective. There is one solution that is easy, cheap, and quite efficient – using air tool oil. Air tool oils are the best solution for taking care of your important air tools. Obviously, you would want the best output from your tools; for this, you need to use the best air tool oil available.

If you choose the best air tool oil, you will be sparing yourself from all the other hassles and significantly increase the lifespan of your tools. But, how will you know which air tool oil company you need to opt for? Below are some of the best air tool oil that you can purchase for your air tools:

Air Tool Oil	Image	Weight	Editor's Rating	Price
Marvel Air Tool Oil MM080R - 4 oz.		4.0 oz	Editor’s Pick (4.7 / 5)	See on Amazon
Lucas Oil 10216 16 Ounce Air Tool Lubricant		16.0 oz	(4.8 / 5)	See on Amazon
Lucas Oil 10200 Air Tool Lubricant - 1 Quart		2.0 oz	(4.7 / 5)	See on Amazon
Marvel Mystery Oil 080 Air Tool Oils, 4 oz, Bottle (Pack of 12)		4.0 oz	(5 / 5)	See on Amazon
Sta-Lube SL2531 Automotive Accessories, 15. Fluid_Ounces		15.0 oz	(4.5 / 5)	See on Amazon
BOSTITCH PREMOIL-20OZ Premium Pneumatic Tool Oil		8.0 oz	(4.8 / 5)	See on Amazon
Super Lube 12004 Air Tool Lubricant, 4 oz Bottle, Translucent Clear		_	(4.8 / 5)	See on Amazon
CLIsyntec Premium Air Tool Lubricant - 16 FL. OZ. Industrial Pneumatic Tool Oil		16.0 oz	(4.7 / 5)	See on Amazon

1. Editor’s Pick – Marvel Air Tool Oil MM080R – 4 oz.

Editor’s Rating:

(4.7 / 5)

Marvel Mystery Oil’sMM080R Air Tool Oil by made of top-notched materials to aid you for a long time to come. The tool oil has been designed with customers in mind and using the latest state-of-the-art technology. It is capable of meeting all your needs and will deliver great quality at a pocket-friendly price rate.

The oil is formulated especially for use in piston-type air tools, rotary, and line lubricators. It is also great for preventing the formation of rust. The positive lubrication cut down tool speed and reduces power outage. It also dissolves sludge and gum that reduce tool power and speed and ensure maximum performance of your tools. The MM080R Air Tool Oil is great for dressing engine compartments and protecting rubber hoses.

The oil has the highest proven performance and will extend the life of your tools as well. MM080R Air Tool Oil is one of the most popular air tools in the market right now, garnering positive responses from happy customers all over the world. It is designed with functionality and precision in mind, thereby ensuring easy-to-use performance that makes it a perfect deal for your satisfaction.

PROS

• The oil does not harm rubber
• Can be used for the lubricating pump
• Quite friendly for a spray bottle
• Can be used with any air tool
• Always works at full capacity

CONS

• The oil is a bit on the expensive side
• The bottle container is too small and the overall quantity is quite less

2. Lucas Oil 10216 16 Ounce Air Tool Lubricant

Editor’s Rating:

(4.8 / 5)

The universal air tool lubricant by Lucas Oil contains a special formula that was developed for working professionals demanding top-notched performance. It varnishes and coats the functioning portions with a pillow of waterproof oils that can counterattack blowout and combats rust. This means that the oil will lube the tool, not your floor.

With the help of this air oil lubricant, even the most extreme climate will not create a problem for you. This is an extremely useful feature because when you are working with an air tool, the temperature tends to go extreme and might possibly affect your tool. But using this oil will make your work a lot easier and smoother.

The Lucas Oil 10216 is a one of the best air tool oil that will increase the overall efficiency of your tool. It will also prevent rusting, which results in a longer lifespan of your tool. Additionally, your tools might face blowout when it gets tighter and rougher inside. But using this air tool oil will prevent these problems from happening too.

When it comes to metallic tools like nailers, water can pose serious problems. Since water can accelerate the rusting process on your tools, they might get jammed while you are at work. Thankfully, the Lucas Oil 10216 lubricant acts as a water disperser to prevent these problems.

PROS

• The oil makes the tool comparatively more slippery
• Keeps the sludge away from your tools
• The effect of oil lasts for a long time
• Prevents corrosion by moisture on the tool surface
• The nozzle aids in easy usage

CONS

• If the corrosion happens due to acidic components, it cannot be prevented

3. Lucas Oil 10200 Air Tool Lubricant – 1 Quart

Editor’s Rating:

(4.7 / 5)

Superslick and long-lasting, the Lucas Oil 10200 will allow your tools to run much longer and easier. It is a superb lubricant that has been packaged for the toolbox. It comprises of a unique formula that has been developed for working professionals who demand top performance. It can easily varnish and coat the working parts and combat rust with the help of the water-proof lubricants that resist blowout.

Apart from combating rusts, the Lucas Oil 10200 will make sure that your tools do not get damaged and will surely extend its lifespan. Since you will be operating your air tool at an extreme temperature from time to time, the lubricant will also protect your tools from getting extremely hot or cold.

The Lucas Oil 10200 will disperse the water from your air tools, which means that it will not allow any water to stick on your tools. This is an important factor because if the water is stuck on your tool, there is a possibility of rusting. As the oil disperses the water, your tools will be free of these hassles.

Additionally, the Lucas Oil 10200 will also protect your tools from a blowout, which can happen when your machine is drilling into something rough. The oil will resist such blowouts and make your air tool much smoother and capable of reducing the roughness.

PROS

• Prevents corrosion due to moisture
• Similar to the 10216, the oil is more slippery compared to others
• Prevents the buildup of sludge
• Fitted with an easy-to-use nozzle
• The oil’s overall effects tend to last longer

CONS

• If it is acid, corrosion may still occur

4. Marvel Mystery Oil 080 Air Tool Oils, 4 oz, Bottle (Pack of 12)

Editor’s Rating:

(5 / 5)

If you are looking for the best air tool oil that is perfect for in-line air lubricators, rotary, or pistol types air tools, then the Marvel Mystery Oil 080 is the perfect one for you. It is packed in a 4-oz. bottle and will prevent the formation of rust on your tools by providing lubrication for smoothening them out.

The oil will also help with the maintenance and will elongate the lifespan of your air tools. The performance of the oil product is nothing short of amazing. Plus, you might even regret not buying it, especially when it has such a great value!

PROS

• By dissolving gum, your tool is capable of maximum performance
• The oil extends the lifespan of your air tools
• Your air tools get more resistant to blowout
• There is a reduction in the power output

CONS

• No cons

5. Sta-Lube SL2531 Automotive Accessories, 15. Fluid_Ounces.

Editor’s Rating:

(4.5 / 5)

The Sta-Lube SL2531 is a great oil product that can effectively lubricate pistol and rotary air tool bearings and motors. Additionally, it also helps air tools run much more effectively and smoothly.

The Sta-Lube SL2531 will also help your air tools to last for a long time to come. The oil manages to condition and moisture the plastic and rubber seals and also O-rings. On top of that, it also prevents corrosion and deposits; this implies that the air tool will run much reliably and cleanly, making it the right choice for you!

PROS

• A few drops are enough to smoothen out your tools
• The oil effectively removes harmful deposits
• The oil works perfectly to reduce rust

CONS

• No Cons

6. BOSTITCH PREMOIL-20OZ Premium Pneumatic Tool Oil

Editor’s Rating:

(4.8 / 5)

The BOSTITCH PREMOIL-20OZ nail gun oil will provide industrial-strength when you apply it to your tools. Once done, you will notice that your nail gun can be operated in a much smoother manner. Compared to other oils in the market, BOSTITCH PREMOIL-20OZ has quite a name.

Since the BOSTITCH PREMOIL-20OZ is a non-detergent solution, it means that no chemicals were used in the making of this nail gun oil. It is 100% pure oil that will make your tools delivers better and smoother performance. Additionally, it will also reduce the friction inside the nail gun that will allow you to shoot with much more accuracy.

With most other oils, there is a problem of them getting consolidated in cold weather. But fortunately, you will be able to use the BOSTITCH PREMOIL-20OZ oil in any climate because it cannot be consolidated easily. It is a premium grade pneumatic tool lubricant that is designed for all pneumatic tools requiring oil.

PROS

• Reduces wear-and-tear by smoothening the gun
• A small number of drops will last for a long time
• There is no corrosion due to acids and chemicals and will keep working at different temperatures
• The container has enough to last you for a long time to come
• Visibly reduces the friction inside the nail gun

CONS

• It is possible of sludge buildup inside the nail gun
• Damage of your tool by water is still a possibility

7. Super Lube 12004 Air Tool Lubricant, 4 oz Bottle, Translucent Clear

Editor’s Rating:

(4.8 / 5)

The Super Lube 12004 has rust and corrosion inhibitors to resist both corrosion and rust. This particular feature makes it the perfect special fluid oil that will help your air tool get enhanced when it comes to performance and work much smoother.

This lubricating oil is capable of working with a wide range of nail guns and pneumatic tools. So, if you want your nail gun to run much smoother than the previous time, you can apply the Super Lube 12004 and check it out for yourself. Additionally, when it comes to avoiding stickiness, there is not better lubricating oil than this one.

The Super Lube 12004 oil is quite light and you require only a few drops to ensure that your nail gun runs smoothly for a long time to come. You can even use it in vast temperature differences. The oil will not get consolidated even at -400°F. In short, this means that whether the temperature is extremely hot or cold, there is nothing that can stop the oil from lubricating your tools at whatever time you feel is convenient.

PROS

• Fitted with a nozzle for easy handling
• Reduces a huge amount of wear-and-tear by rough usage
• Prevents the sludge from building up and consolidating inside the tool
• The oil will enhance your control over temperature
• Improves the lifespan and efficiency of your tool

CONS

• The effects of moisture and acid are not sufficiently reduced

8. CLIsyntec Premium Air Tool Lubricant – 16 FL. OZ. Industrial Pneumatic Tool Oil

Editor’s Rating:

(4.7 / 5)

The CLIsyntec Premium oil prevents rust caused by water from gripping the inner surface of your air tool. With this, damages caused by rust are prevented. Additionally, harmful composites like sludge and varnishes, which can drastically reduce the lifespan of your air tool, are kept at bay with the help of this lubricating oil. In short, this means that your tools will be given a long lifespan.

Unlike other pneumatic air tool oils, the CLIsyntec Premium also preserves elasticity. This means that the oil can last for a long time once it is applied to your tool. These few drops are enough for smoothing out your air tools for months together in a row.

The CLIsyntec Premium provides very significant benefits for your air tools than any other pneumatic oil. Hence, choosing this oil can be a smart choice.

PROS

• Will increase the lifespan of your air tools
• Will keep the varnish and sludge away from the tools
• Reduced the friction which can be caused by jamming
• Fitted with a nozzle for ease-of-use
• Prevention of moisture-based corrosion

CONS

• Corrosion by acid cannot be prevented completely
• Can possibly get consolidated in cold temperature

Importance Of Air Tool Oil

Compressed air contains contaminants like dust, dirt, moisture, etc. that can interfere with the proper functioning of the air tools or any other pneumatic equipment. Due to the relative humidity in the air and the overall condensation caused by the cooling and expansion of compressed air, moisture exists.

Lubricants are not formulated specifically to operate in the presence of moisture and can interact with that to form gum, rust, and sludge. In the case of air tools that are left out in the storage and not has been put to use for a long time, this fact is especially true. On top of that, there are tons of other contaminants that can pass through the filter system, thereby causing sticky substances and varnishes to form on your air tools, thereby decreasing the tool performance.

The wrong air tool oil product such as penetrating oils, motor oils, and hydraulic oils that are used in air tools, are not meant to be used in air systems. These oils are not capable of combating against contaminants and line-air moisture, and can actually damage your tools like gate openers and chipping hammers.

Most contractors, utilities, processing plants, and manufacturing plants make use of pneumatic equipment and tools. The performance and lifespan of these air tools are important to the productivity and operation of the job or facility site. Factors like shorter tool life, poor performance, and slow running destroy productivity. Incorrect or inadequate air tool oil is a major contributor to poor performance in both rotary air motors and piston air motors.

Things To Consider While Looking For The Best Air Tool Oil

The best air tool oil ensures that the air quality for your tools, thereby optimizing lifespan and tool performance. The factors you need to consider when buying air tool oil are:

• Take a look around your environment. If you work in a robust industrial setting like heavy machinery | Welding machine, oil and gas, shipyards and foundries, it is recommended that you opt for metallic FRLs. For small industries, like the vehicle service industry, you can choose composite air tool oils.
• You need to choose the right air tool oil. In most cases, you might have to choose between FRL units with 2 or 3-stage. While both of these solutions are capable of delivering the same three functions, the difference lies in the compactness and aesthetics. If you are in need of higher dynamic pressure, it is recommended that you opt for the 3-stage unit. For specific environments, you would mostly need 1 or 2 functions. In this case, you can choose the 1-stage FRL.
• You should also check the viscosity of the oil. You can test this by putting some oil on your fingers and touch them together. Then, pull them apart and watch how long the oil sticks and remains unruffled until the bond stretches too thin and breaks. In the case of lightweight oil, there should be minimum to no bond at all. However, there are many different viscosities of oil available, and you might have to choose one according to your personal preference.

How Do You Oil Air Tools?

Air tool oil is a must for almost every type of air tool. They will definitely need lubrication. Some tools might need daily lubrication while others might have a grease fitting. There are tools that might need constant-feed lubrication while some require lubrication every once in a while. Here is how you can oil your pneumatic tools:

1. Check for loose screws always

On most pneumatic tools, you need to check the trigger and safety each day to ensure that they are moving freely. Next, you need to make sure that all the screws are tightened properly. If you do not fix the loose cap screws, the tool is leak and will lead to inefficiency.

2. Clean the feed system

The feed system is another part of the pneumatic tool that needs daily maintenance. The feed system should be extremely smooth all the way through. You can make use of an old magazine to wipe it or blow it out with air. Do not pour the air tool oil in this step as it will only attract more debris and dirt, rather than remove them.

3. Lubricating the air fitting

You need to squeeze out 5-6 drops of air tool oil into the air fitting every day. If you happen to use the tool the entire day, you need to repeat the process halfway through. But if you do not use the tool often, you may oil it whenever you plan to use it.

The above is just a general method on how you need to oil your pneumatic tools. There are a lot of different options by which you can lubricate your air tools. Some tools might have a removable plug or cap where you can simply inject the oil daily into a small cavity.

For other tools that are not equipped with a plug or a cap might need constant-feed lubrication.  In most of these tools, a short whip hose with an inline oiler is connected from the compressor to the tool. This hose, or oiler, is fitted with an adjustment known inside from where you can control the amount of oil going into your tool and change it accordingly.

Once you are done with the adjustments, you can fill the hose with the best air tool oil and connect it to the airline. Once you turn on the air, the hose will keep feeding small amounts of oil to the tool continuously until the reserve gets finished. This way, your tool will remain well-oiled, maintained and operational.

There is another way of lubricating your air tools; although, this method is least-preferred. You can also give your air tool a shot of the oil before you start using it, and several more times during the work period directly via the air inlet.

You can check the video out here.

Conclusion

If you are looking for the best air tool oil, you can definitely choose any of the ones mentioned above. However, it is possible that you might still have a lot of questions in your mind. For instance, you might want to know whether the oil you buy can be refilled, instead of having to buy a whole new round. Yes, you absolutely can!

The best air tool oil is important for your tools in you want them to last for a long time. Maintaining your air tools as well as making sure that your compressed air is as dry and clean as possible will help prolong the lifespan of these tools and protect your interests as well. However, it is always handy to keep pneumatic, or air tools, oil nearby that can be used in case of an immediate emergency.

All the air tool oils mentioned above are best air tool oil products that not only prove to be life-saving for your tools but will also maintain them for a long time to come! I hope that you choose the best air tool oil from the list above.